Bezel, Instrument Panel, Lower: Removal: Removal

WARNING: This page is about a different variant/trim than selected.

Fig 1: Gear Shifter Switch Bezel

Courtesy of CHRYSLER GROUP, LLC

Remove the floor console. Refer to CONSOLE, FLOOR, REMOVAL .
Using trim stick (special tool #C-4755, Trim Stick), pry the gear shifter switch bezel (1) to disengage the retaining tabs.

Fig 2: Three Electrical Connectors
Courtesy of CHRYSLER GROUP, LLC
Disconnect the three electrical connectors (1) on the bottom of the electronic shifter switch bezel.

Fig 3: Lower Instrument Panel Bezel & Screws
Courtesy of CHRYSLER GROUP, LLC
Remove the screws (1, 2) securing the lower instrument panel bezel (3).
Remove the lower instrument panel bezel (3) from the vehicle.