LEMON Manuals: Even more car manuals for everyone
Home >> Fiat >> 2015 >> 500 Pop, Standard Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 12 (1.4L 16-Valve Turbo Engine (Service Information) 500) >> Cylinder Head >> Rocker Arm, Valve >> Installation >> Installation

Rocker Arm, Valve: Installation: Installation

WARNING: This page is about a different variant/trim than selected.
Fig 1: Rocker Arms
GC0152613Courtesy of CHRYSLER GROUP, LLC
  1. Lubricate the rocker arms with clean engine oil before installation.
  2. Install the rocker arm(s) (1) and engage the retaining clip.
  3. Install the variable valve actuation assembly. Refer to ASSEMBLY, VARIABLE VALVE ACTUATION, INSTALLATION .
  4. Connect the negative battery cable and tighten nut to 5 N.m (45 in. lbs.).
scientia non olet · About LEMON Manuals