Possible Causes
| Possible Causes |
|---|
| CMP SENSOR SIGNAL CIRCUIT SHORTED TO VOLTAGE |
| CMP SENSOR SIGNAL CIRCUIT OPEN |
| CMP SENSOR SIGNAL CIRCUIT SHORTED GROUND |
| CMP SENSOR SIGNAL CIRCUIT SHORTED TO THE 5-VOLT SUPPLY CIRCUIT |
| SENSOR GROUND CIRCUIT OPEN |
| CAMSHAFT POSITION SENSOR |
| CRANKSHAFT POSITION SENSOR |
| POWERTRAIN CONTROL MODULE (PCM) |
Always perform the Pre-Diagnostic Troubleshooting procedure before proceeding. Refer to PRE-DIAGNOSTIC TROUBLESHOOTING PROCEDURE .