LEMON Manuals: Even more car manuals for everyone
Home >> Fiat >> 2014 >> 500c Abarth >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (1.4L Engine - I4 Non-Turbo (Service Information) 500 & 500C) >> Cylinder Head >> Lifter(S), Hydraulic >> Removal >> Removal

Lifter(S), Hydraulic: Removal: Removal

WARNING: This page is about a different variant/trim than selected.
Fig 1: Hydraulic Lifters
GC0152612Courtesy of CHRYSLER GROUP, LLC
  1. Disconnect and isolate the negative battery cable.
  2. Remove the camshaft. Refer to CAMSHAFT, ENGINE, REMOVAL  .
    NOTE:

    If the hydraulic lifters are to be reused, identify their positions so that they can be reassembled into their original locations.

  3. Remove the hydraulic lifter(s) (1).
scientia non olet · About LEMON Manuals