Section 65 (Circuit Testing Procedures - Non-DTC-Based Diagnostics - 500E)
WARNING: This page is about a different car, the 2014 Fiat 500e. However, it is still accessible from the selected car via links, so may be relevant.
- Warning
- Description
- Diagnosis And Testing
- Standard Procedure
- Check A 12-Volt Fused Battery B(+) Circuit For Voltage
- Check A 12-Volt Switched Battery B(+) Circuit For Voltage
- Check A 5-Volt Supply Circuit For Voltage
- Check A Circuit For A Short To Ground
- Check A Circuit For A Short To Voltage
- Check For An Open Ground Circuit
- Check For A Short Between Multiple Circuits
- Check The Resistance Of A Circuit Using An Ohmmeter
- Check For Excessive Current Draw
- Circuit Load Testing Procedure
- Voltage Drop Test Procedure
- Electrostatic Discharge (ESD) Sensitive Devices
- Wire Splicing
- Removal
- Installation