LEMON Manuals: Even more car manuals for everyone
Home >> Fiat >> 2014 >> 500c Abarth >> Repair and Diagnosis >> External Pages >> Different car >> Section 61 (Electronic Power Steering (EPS) Module - Electrical Diagnostics - 500E) >> Diagnosis And Testing >> C1005-86-Status Lamp Failure BCM - Signal Invalid >> Set Condition

Set Condition

WARNING: This page is about a different car, the 2014 Fiat 500e. However, it is still accessible from the selected car via links, so may be relevant.

If the Body Control Module (BCM) detects an EPS status lamp failure, this DTC will set.