LEMON Manuals: Even more car manuals for everyone
Home >> Fiat >> 2014 >> 500c Abarth >> Repair and Diagnosis >> External Pages >> Different car >> Section 53 (Body Control Module (BCM) - DTCS B106A-19 To B2229-62 - 500E) >> Diagnosis And Testing >> B1A25-62-Invalid Key - Signal Compare Failure >> Diagnostic Test

Diagnostic Test

WARNING: This page is about a different car, the 2014 Fiat 500e. However, it is still accessible from the selected car via links, so may be relevant.

TEST FOR INTERMITTENT CONDITION 

  1. With the scan tool, record and erase the DTCs.
  2. Be sure the ignition on.
  3. Wait 30 seconds.
  4. With the scan tool, read the active DTCs.

    Does the scan tool display this DTC as active?

    Yes 

    • Replace and program the RKE Fob in accordance with the Service Information.
    • Perform the BODY VERIFICATION TEST. Refer to STANDARD PROCEDURE .

    No 

    • Test complete, the condition or conditions that originally set this DTC are not present at this time. The RKE Fob that set this code is not present in the ignition at this time.
    • Perform the BODY VERIFICATION TEST. Refer to STANDARD PROCEDURE .
scientia non olet · About LEMON Manuals