LEMON Manuals: Even more car manuals for everyone
Home >> Fiat >> 2014 >> 500c Abarth >> Repair and Diagnosis >> External Pages >> Different car >> Section 53 (Body Control Module (BCM) - DTCS B106A-19 To B2229-62 - 500E) >> Diagnosis And Testing >> B11FA-00-Humidity Sensor Internal >> Diagnostic Test

Diagnostic Test

WARNING: This page is about a different car, the 2014 Fiat 500e. However, it is still accessible from the selected car via links, so may be relevant.

CHECK FOR AN ACTIVE DTC 

  1. Turn the ignition on.
  2. With the scan tool, read DTCs.

    Does the scan tool display: B11FA-00-HUMIDITY SENSOR INTERNAL?

    Yes 

    • Replace the Humidity Sensor in accordance with the Service Information.
    • Perform the BODY VERIFICATION TEST. Refer to STANDARD PROCEDURE .

    No 

    • Test Complete.