LEMON Manuals: Even more car manuals for everyone
Home >> Fiat >> 2014 >> 500c Abarth >> Repair and Diagnosis >> External Pages >> Different car >> Section 47 (Antilock Brake System (Abs) - Electrical Diagnostics - 500E) >> Diagnosis And Testing >> C10CE-02-Brake Switch - General Signal Failure >> Set Condition

Set Condition

WARNING: This page is about a different car, the 2014 Fiat 500e. However, it is still accessible from the selected car via links, so may be relevant.

Brake switch is active and following conditions are true when Master Cylinder Pressure is less than 6.2 bar (90 psi) for two minutes and throttle position is greater than 20 % then vehicle Acceleration is greater than 0.4 m/s for two seconds.

scientia non olet · About LEMON Manuals