LEMON Manuals: Even more car manuals for everyone
Home >> Fiat >> 2014 >> 500c Abarth >> Repair and Diagnosis >> External Pages >> Different car >> Section 44 (Power Inverter Module (PIM) - Electrical Diagnostics - 500E) >> Diagnosis And Testing >> U1202-00-Lost Communication With Electronic Vehicle Control Unit >> Diagnostic Test

Diagnostic Test

WARNING: This page is about a different car, the 2014 Fiat 500e. However, it is still accessible from the selected car via links, so may be relevant.

IS DTC ACTIVE 

NOTE:

For vehicle communication problems, use the scan tool to refer to the Network Review Screen. The screen depicts a high level view of the vehicle network. Fault and problem areas appear in red. Selecting any of the network components allows access to the source of the problem.

  1. Turn the ignition on.
  2. With a scan tool, read the active DTCs.

    Does the scan tool display: U1202-00-LOST COMMUNICATION WITH ELECTRONIC VEHICLE CONTROL UNIT?

    Yes 

    • Refer to  DIAGNOSIS AND TESTING  and perform the U1202-00-LOST COMMUNICATION WITH ELECTRONIC VEHICLE CONTROL UNIT diagnostic procedure.

    No 

    • Refer to  DIAGNOSIS AND TESTING  and perform the STORED LOST COMMUNICATION DTCS diagnostic procedure.