LEMON Manuals: Even more car manuals for everyone
Home >> Fiat >> 2014 >> 500c Abarth >> Repair and Diagnosis >> External Pages >> Different car >> Section 35 (Wiper System & Washer System - (Service Information) - 500E) >> Check Valve, Washer >> Installation >> Installation

Check Valve, Washer: Installation: Installation

WARNING: This page is about a different car, the 2014 Fiat 500e. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Cowl Plenum Cover/Grille Panel, Front Washer System Check Valve & Two Washer Nozzle Hoses
GC0153291Courtesy of CHRYSLER GROUP, LLC
  1. Position the front washer system check valve (2) to the underside of the cowl plenum cover/grille panel (1). Be certain that the flow direction arrow molded into the check valve body is oriented towards the washer nozzles.
  2. From the underside of the cowl plenum cover/grille panel, reconnect the engine compartment and the two washer nozzle hoses (3) to the three barbed nipples of the check valve.
  3. Reinstall the cowl plenum cover/grille panel over the cowl plenum. Refer to COVER, COWL PANEL, INSTALLATION .
scientia non olet · About LEMON Manuals