LEMON Manuals: Even more car manuals for everyone
Home >> Fiat >> 2014 >> 500c Abarth >> Repair and Diagnosis >> External Pages >> Different car >> Section 3 (Frame And Bumpers - 500E) >> Bumpers >> Reinforcement, Bumper, Front >> Removal >> Removal

Reinforcement, Bumper, Front: Removal: Removal

WARNING: This page is about a different car, the 2014 Fiat 500e. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Upper & Lower Bumper Reinforcement
GC0153091Courtesy of CHRYSLER GROUP, LLC
  1. Remove the front fascia. Refer to FASCIA, FRONT, REMOVAL .
  2. Remove the fasteners securing the upper bumper reinforcement (1) to the frame/front end module. Repeat on the opposite side and remove the upper bumper reinforcement (1).
  3. Remove the fasteners securing the lower bumper reinforcement (2) to the frame/front end module. Remove the lower bumper reinforcement (2). If necessary, repeat on the opposite side.