LEMON Manuals: Even more car manuals for everyone
Home >> Fiat >> 2014 >> 500c Abarth >> Repair and Diagnosis >> External Pages >> Different car >> Section 20 (Electronic Control Modules - (Service Information) - 500E) >> Standard Procedure >> Program The TPM (Tire Pressure Monitor Module)

Program The TPM (Tire Pressure Monitor Module)

WARNING: This page is about a different car, the 2014 Fiat 500e. However, it is still accessible from the selected car via links, so may be relevant.
  1. Connect the scan tool.
  2. Check vehicle for DTCs.
  3. Clear all stored DTCs.
  4. Turn car OFF then ON and confirm DTCs are gone.
  5. Go to TPM >> Misc. Functions >> Proxi Alignment.

If required, continue to programming the next module.

scientia non olet · About LEMON Manuals