LEMON Manuals: Even more car manuals for everyone
Home >> Fiat >> 2014 >> 500c Abarth >> Repair and Diagnosis >> External Pages >> Different car >> Section 13 (Lamps/Lighting - Exterior - (Service Information) - 500E) >> Diagnosis And Testing >> Diagnosis And Testing - Exterior Lighting >> Hazard Warning Lamps

Hazard Warning Lamps

WARNING: This page is about a different car, the 2014 Fiat 500e. However, it is still accessible from the selected car via links, so may be relevant.
CONDITION POSSIBLE CAUSES CORRECTION
HAZARD WARNING LAMPS DO NOT FLASH 1. Ineffective hazard warning switch. 1. Test and replace hazard warning switch (upper instrument panel switch pod) if required.
2. Ineffective BCM inputs or outputs. 2. Use a diagnostic scan tool to test the BCM inputs and outputs. Refer to the appropriate diagnostic information.
HAZARD WARNING LAMPS DO NOT STOP FLASHING 1. Ineffective hazard warning switch. 1. Test and replace hazard warning switch (upper instrument panel switch pod) if required.
2. Ineffective BCM inputs or outputs. 2. Use a diagnostic scan tool to test the BCM inputs and outputs. Refer to the appropriate diagnostic information.
scientia non olet · About LEMON Manuals