Panel, B-Pillar Trim: Removal: Removal
WARNING: This page is about a different car, the 2014 Fiat 500e. However, it is still accessible from the selected car via links, so may be relevant.
- Remove the seat belt anchor at the rear seat. Refer to RETRACTOR, SEAT BELT, REMOVAL .
- Using trim stick (special tool #C-4755, Trim Stick) or equivalent, disengage the B-pillar trim panel retaining tabs/clips located at the bottom and upper rear areas.
- Pull downward on the B-pillar trim panel.
- Remove the B-pillar trim panel (1) and feed the seat belt through the opening.