Mount, Motor: Installation: Right

WARNING: This page is about a different car, the 2014 Fiat 500e. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Right Motor Mount & Bolts

Courtesy of CHRYSLER GROUP, LLC

Install the right motor mount (1), and install the three motor mount bolts (2). Tighten the bolts to 55 N.m (41 ft. lbs.).

Fig 2: RH Front Motor Mount Through-Bolt
Courtesy of CHRYSLER GROUP, LLC
Install and tighten the right motor mount through-bolt (1) to 100 N.m (74 ft. lbs.).

Fig 3: Battery Coolant Heater (BCH) Nuts & Ground Strap Bolt
Courtesy of CHRYSLER GROUP, LLC
Install the two Battery Coolant Heater (BCH) nuts (2) and tighten to 20 N.m (15 ft. lbs.).
Install the BCH ground strap bolt (1) and tighten to 12 N.m (9 ft. lbs.).

Fig 4: Washer Bottle Bolts
Courtesy of CHRYSLER GROUP, LLC
Install the right front wheelhouse splash shield. Refer to SHIELD, SPLASH, FRONT WHEELHOUSE, INSTALLATION .
.