LEMON Manuals: Even more car manuals for everyone
Home >> Fiat >> 2014 >> 500L Easy, Standard Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 3 (DTCS P0218-00 To P1CBF-00 - C635 DDCT Automatic Transmission - 500L) >> Diagnosis And Testing >> P1C9B-00-Gear Shift Position Sensor 2 Circuit High >> When Monitored

When Monitored

WARNING: This page is about a different variant/trim than selected.

Ignition key is ON or the TCM control unit is in power-on state. The engine is not in cranking mode.

Power supply must be between 7 volts and 24 volts and Main Micro Processor (MMP) supply diagnostics have not failed.

The Sensor Power Supply 2 (VS2) to the Gear Shift Position Sensor "B" has no electrical failure.

scientia non olet · About LEMON Manuals