LEMON Manuals: Even more car manuals for everyone
Home >> Fiat >> 2014 >> 500L Easy, Standard Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 3 (DTCS P0218-00 To P1CBF-00 - C635 DDCT Automatic Transmission - 500L) >> Diagnosis And Testing >> P16F0-00-SPI Comm Hardware Fault >> Theory Of Operation

Theory Of Operation

WARNING: This page is about a different variant/trim than selected.

This diagnostic checks the status of the SPI communication between the Main Micro Processor (MMP) and three separate integrated circuits named MGS1, MGS2 and MGS3. The MGS1 drives the even clutch electrovalve (PPV-K2) and the 2-3-R gear-engaging electrovalve (PPV1). The MGS2 drives the odd clutch electrovalve (QPV-K1) and the 1-4-5-6 gear-engaging electrovalve (PPV2). The MGS3 drives the gate select electrovalve (PPVS). The MMP communicates with each MGS via a SPI protocol which is checked by an internal diagnostic of the MGS. When each MGS detects a communication malfunction, the DTC is set.