Set Condition
WARNING: This page is about a different variant/trim than selected.
Pressure Low for Gear Shifting
If the low pass filtered hydraulic pressure value falls below a threshold (minimum acceptable value to perform a gear shift) for a calibratable amount of time or if the accumulated number of low pressure occurrences exceeds a calibratable value in a trip, then a fault is set.
Pressure Low for Clutch Open
If the low pass filtered hydraulic pressure value falls below a threshold (minimum acceptable value to keep the clutch open) for a calibratable amount of time or if the accumulated number of low pressure occurrences exceeds a calibratable value in a trip, then a fault is set.