LEMON Manuals: Even more car manuals for everyone
Home >> Fiat >> 2014 >> 500L Easy, Standard Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 3 (DTCS P0218-00 To P1CBF-00 - C635 DDCT Automatic Transmission - 500L) >> Diagnosis And Testing >> P0893-00-Multiple Gears Engaged >> When Monitored

When Monitored

WARNING: This page is about a different variant/trim than selected.

The TCM control unit is in power-on state, the engine is not in cranking mode and the system is not in engaged gear identification mode (the mode in which the TCM identifies the engaged gear at every power on).

Power supply must be between 7 volts and 24 volts.

No one of the Gear Shift Position Sensors (1st-3rd, 2nd-4th, 5th-RV, 6th) has failed.