LEMON Manuals: Even more car manuals for everyone
Home >> Fiat >> 2014 >> 500L Easy, Standard Trans >> Repair and Diagnosis >> Engine Mechanical >> Blowers, Superchargers & Turbochargers >> 1.4L Engine - (Service Information) - 500L >> Lubrication >> Jet, Piston Oil Cooler >> Removal >> Removal

Jet, Piston Oil Cooler: Removal: Removal

Fig 1: Driving Out Piston Oil Cooler Jet
GC0152691Courtesy of CHRYSLER GROUP, LLC
NOTE:

Piston oil cooler jet for cylinder one shown in illustration. Piston oil cooler jets for cylinders two, three and four are similar.

  1. Remove the piston and connecting rod(s). Refer to ROD, PISTON AND CONNECTING, REMOVAL .
  2. Remove the crankshaft. Refer to CRANKSHAFT, REMOVAL .
  3. Using a suitable drift (1), drive the piston oil cooler jet(s) (2) from the engine block.
  4. Discard the piston oil cooler jet(s), they are not reusable.
scientia non olet · About LEMON Manuals