LEMON Manuals: Even more car manuals for everyone
Home >> Fiat >> 2014 >> 500 Pop, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 62 (Electronic Power Steering (EPS) Module - Electrical Diagnostics - 500E) >> Diagnosis And Testing >> C1005-86-Status Lamp Failure BCM - Signal Invalid >> Set Condition

Set Condition

WARNING: This page is about a different car, the 2014 Fiat 500e. However, it is still accessible from the selected car via links, so may be relevant.

If the Body Control Module (BCM) detects an EPS status lamp failure, this DTC will set.

scientia non olet · About LEMON Manuals