LEMON Manuals: Even more car manuals for everyone
Home >> Fiat >> 2014 >> 500 Pop, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 6 (Base Brakes - (Service Information) - 500E) >> Electrical >> Switch, Brake Fluid Level >> Installation >> Installation

Switch, Brake Fluid Level: Installation: Installation

WARNING: This page is about a different car, the 2014 Fiat 500e. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Brake Fluid Reservoir, Supply Hose & Connector
GC0157830Courtesy of CHRYSLER GROUP, LLC
  1. Insert brake fluid switch into reservoir until it is firmly in place.
  2. Connect the wiring harness connector (2) to the switch.
scientia non olet · About LEMON Manuals