Section 18 (Audio/Video/Entertainment/Connectivity - (Service Information) - 500E): Amplifier: Removal: Removal
WARNING: This page is about a different car, the 2014 Fiat 500e. However, it is still accessible from the selected car via links, so may be relevant.
WARNING:
On vehicles equipped with the high voltage system, disconnecting the 12-volt battery negative cable alone will not power down the 12-volt system. You must perform the 12-volt Power Down procedure before proceeding. Failure to follow these instructions may result in possible serious or fatal injury.
- Disconnect the 12-volt negative battery cable.
- Power down the high-voltage system. Refer to ELECTRIC VEHICLE CONTROL SYSTEM, STANDARD PROCEDURE .
- Remove the amplifier trim cover (1) from the amplifier mounting bracket (2).
- Remove the amplifier (3) to mounting bracket (4) retainers (1).
- Disconnect the amplifier electrical connectors (2).
- Remove the amplifier from the vehicle (3).