Seat, Front: Removal: Removal
NOTE:
Base model shown in the illustration, other models typical unless noted.
NOTE:
Driver side shown in the illustration, passenger side typical unless noted.
- Disconnect the negative battery cable.
- Position the seat forward.
- Remove the seat to floor bolts (1, 2) located in the rear area of the front seat.
- Passenger side seats, remove the harness cover (2) by pulling the retaining pins (1).
- Position the seat rearward.
- Remove the seat to floor bolts (1).
- Disconnect the wiring harness connectors.
- Remove the seat from the vehicle.