Handle, Front Recliner: Removal: Removal

Fig 1: Trim Cap & Seat Back Recliner Lever

Courtesy of CHRYSLER GROUP, LLC

NOTE:

Before proceeding with the following procedure, review all Warnings and Cautions. Refer to WARNING .

NOTE:

Passenger seat shown in the illustration. Driver seat similar.

Remove the front seat being serviced and place it on a workbench. Refer to SEAT, FRONT, REMOVAL .
Using Trim Stick (special tool #C-4755, Trim Stick) or equivalent, remove the trim cap (1) from the seat back recliner lever (2).

Fig 2: Screw, Seat Back Recliner Lever, Inboard Seat Cushion Side Shield & Washer
Courtesy of CHRYSLER GROUP, LLC
Remove the screw (1) and washer (2) that secure the seat back recliner lever (3) to the seat and remove the lever.