Body - Interior & Exterior - Except 500E: DECKLID/Hatch/Liftgate/Tailgate: Latch: Removal: Removal

Fig 1: Fasteners

Courtesy of CHRYSLER GROUP, LLC

1. Open the liftgate.
2. Disconnect the negative battery cable.
3. Remove the liftgate trim panel. Refer to PANEL, TRIM, LIFTGATE, REMOVAL .
4. Remove the fasteners (1) securing the latch to the liftgate.
   Fig 2: Harness Connector & Latch

   Courtesy of CHRYSLER GROUP, LLC
5. Disconnect harness connector (2) from the latch (1).
6. Remove the latch (1) through the access cavity in the liftgate.