LEMON Manuals: Even more car manuals for everyone
Home >> Fiat >> 2012 >> 500c Pop, Automatic Trans >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> (Instrument Cluster - Electrical Diagnostics) >> Diagnosis And Testing >> B1000-45-Ecu Internal - Program Memory Failure >> Diagnostic Test

Diagnostic Test

  1. CHECK FOR AN ACTIVE DIAGNOSTIC TROUBLE CODE (DTC) 
    1. Turn the ignition on.
    2. With the scan tool, read DTCs.

      Does the scan tool display this DTC as active?

      Yes 

      • Replace the Instrument Panel Cluster (IPC) in accordance with the Service Information. Refer to REMOVAL .
      • Refer to STANDARD PROCEDURE and perform the BODY VERIFICATION TEST.

      No 

      • Test complete, the condition or conditions that originally set this DTC are not present at this time. Using the wiring diagrams as a guide, check all related splices and connectors for signs of water intrusion, corrosion, pushed out or bent terminals, and correct pin tension.
      • Refer to STANDARD PROCEDURE and perform the BODY VERIFICATION TEST.
scientia non olet · About LEMON Manuals