Cover, Header: Removal: Removal

Fig 1: Sun Visor & Fastener

Courtesy of CHRYSLER GROUP, LLC

Remove the dome lamp and power top switch. Refer to SWITCH, POWER TOP, FULL OPEN RETRACTABLE ROOF, REMOVAL .
Remove the visor (2) and visor support. Refer to VISOR, REMOVAL and SUPPORT, VISOR, REMOVAL .

Fig 2: Front Header Panel & Fasteners
Courtesy of CHRYSLER GROUP, LLC
Remove the rivet (2) located in the dome lamp cavity securing the front header cover (1) to the roof header.
Using (special tool #C-4755, Trim Stick) or equivalent, disengage the retaining clips located under the visor support cavities and remove the front header cover (1).