Antenna, Satellite: Installation: Convertible

Fig 1: Antenna Module & Connectors

Courtesy of CHRYSLER GROUP, LLC

1. Install the antenna module (3).
2. Connect the antenna connector (2) from the body side antenna connector (1).
   Fig 2: Front Header Panel & Fasteners

   Courtesy of CHRYSLER GROUP, LLC
3. Install the front header panel (1). Refer to COVER, CONVERTIBLE, INSTALLATION and COVER, HEADER, INSTALLATION .
   Fig 3: Sun Visor & Fastener

   Courtesy of CHRYSLER GROUP, LLC
4. Install both front visors (2). Refer to VISOR, INSTALLATION .
5. Connect the negative battery cable.
6. Verify operation outside with a clear line of sight not obstructed by trees or buildings.