Antenna, Satellite: Removal: Convertible

Fig 1: Sun Visor & Fastener

Courtesy of CHRYSLER GROUP, LLC

1. Disconnect and isolate the negative battery cable.
2. Remove both visors (2). Refer to VISOR, REMOVAL .
   Fig 2: Front Header Panel & Fasteners

   Courtesy of CHRYSLER GROUP, LLC
3. Remove the front header panel (1). Refer to COVER, CONVERTIBLE, REMOVAL and COVER, HEADER, REMOVAL .
   Fig 3: Antenna Module & Connectors

   Courtesy of CHRYSLER GROUP, LLC
4. Disconnect the antenna connector (2) from the body side antenna connector (1).
5. Remove the antenna module (3).