LEMON Manuals: Even more car manuals for everyone
Home >> Fiat >> 2012 >> 500 L4-1.4L >> Repair and Diagnosis >> Engine, Cooling and Exhaust >> Engine >> Cylinder Head Assembly >> Rocker Arm Assembly >> Service and Repair >> Removal and Replacement >> Valve Rocker Arm - Installation

Valve Rocker Arm - Installation






INSTALLATION





1. Lubricate the rocker arms with clean engine oil before installation.
2. Install the rocker arm(s) (1) and engage the retaining clip.
3. Install the variable valve actuation assembly Variable Valve Actuation Assembly - Installation.
4. Connect the negative battery cable and tighten nut to 5 Nm (45 in. lbs.).

scientia non olet · About LEMON Manuals