LEMON Manuals: Even more car manuals for everyone
Home >> Fiat >> 2012 >> 500 Gucci >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Cluster (Service Information) >> Installation >> Installation >> Cluster Hood And Lens

Cluster Hood And Lens

Fig 1: Cluster Housing, Our Screw Fasteners & Connector Receptacle
GC0152914Courtesy of CHRYSLER GROUP, LLC
  1. Position the cluster hood and lens assembly over the face of the instrument cluster.
  2. Be certain the Electronic Vehicle Information Center (EVIC) switches are not obstructed.
  3. Press firmly and evenly on the hood and lens assembly until each of the side latches are fully engaged around the perimeter of the cluster housing.
  4. Install the instrument cluster into the instrument panel. BEZEL, INSTRUMENT CLUSTER, INSTALLATION .
scientia non olet · About LEMON Manuals