LEMON Manuals: Even more car manuals for everyone
Home >> Fiat >> 1980 >> Strada Custom, 4D Hatchback, Standard Trans >> Repair and Diagnosis (Single Page) >> Engine Mechanical >> Mechanical >> Fiat Engines - 4-Cylinder >> Valves >> Valve Springs >> Removal

Valve Springs: Removal

  1. With cylinder head removed, remove camshaft housing cover, intake and exhaust manifolds and camshaft with camshaft housing.
  2. Using a suitable valve spring compressor (A.60311) compress valve spring. Remove valve keepers and release compressor. Remove spring retainer, inner spring, outer spring, lower spring seat and washer.
    Fig 1: Using Special Valve Spring Compressor to Remove Valve Springs
    G09359737Courtesy of NOT AVAILABLE
  3. Inspect valve springs for wear or cracking. Using a suitable spring tester (AP.5049) check inner and outer springs against specifications with specified load applied.
scientia non olet · About LEMON Manuals