LEMON Manuals: Even more car manuals for everyone
Home >> Fiat >> 1980 >> Strada Custom, 4D Hatchback, Standard Trans >> Repair and Diagnosis (Single Page) >> Engine Mechanical >> Mechanical >> Fiat Engines - 4-Cylinder >> Engine, Cylinder Head & Manifolds >> Cylinder Head >> Removal

Cylinder Head: Removal

  1. Disconnect positive battery cable. Drain engine cooling system. Remove spare tire from engine compartment. Remove air cleaner housing and cartridge. Disconnect spark plug wires at spark plugs.
  2. Disconnect accelerator linkage and choke cable at carburetor. Disconnect fuel line at carburetor. Disconnect wire from temperature sending unit.
  3. Disconnect heater hose at cylinder head. Disconnect all water hoses at union on left side of engine. Disconnect exhaust pipe from exhaust manifold.
  4. Disconnect reaction rod from engine bracket and hose from exhaust shroud. Remove timing cover, then remove alternator and water pump drive belt. Remove air pump drive belt, then loosen nut on tensioner pulley and remove timing belt. Remove cylinder head nuts and bolts, then remove head and manifolds as an assembly.
scientia non olet · About LEMON Manuals