LEMON Manuals: Even more car manuals for everyone
Home >> Fiat >> 1980 >> Strada Custom, 4D Hatchback, Standard Trans >> Repair and Diagnosis (Single Page) >> Engine Mechanical >> Mechanical >> Fiat Engines - 4-Cylinder >> Camshaft >> Timing Belt Replacement >> Removal (Strada)

Removal (Strada)

  1. Remove right guard and loosen timing belt cover retaining screws. Remove timing belt cover. Check timing by aligning index marks on top and bottom of camshaft sprocket with index marks on engine mounting and upper case. Index marks on crankshaft sprocket and crankshaft seal case should be in alignment.
  2. Put vehicle in low gear and apply hand brake to prevent crankshaft from turning. Remove fan belt, loosen tensioner pulley retaining nut and relieve tension. Remove timing belt.
scientia non olet · About LEMON Manuals