LEMON Manuals: Even more car manuals for everyone
Home >> Fiat >> 1979 >> Strada Custom, 2D Hatchback, Automatic Trans >> Repair and Diagnosis (Single Page) >> Engine Mechanical >> Mechanical >> 128, STRADA & X1/9 4-Cylinder >> Engine, Cylinder Head & Manifolds >> Intake & Exhaust Manifold

Intake & Exhaust Manifold

  1. Drain cooling system. Remove spare tire from engine compartment. Remove air cleaner and cartridge. Disconnect accelerator linkage and choke cable from carburetor. Remove carburetor pre-heating water hoses.
  2. Remove carburetor with guard and gaskets. Remove shroud from intake and exhaust manifold. Remove intake and exhaust manifold from engine.
  3. To install, use new gaskets and reverse removal procedure.
scientia non olet · About LEMON Manuals