LEMON Manuals: Even more car manuals for everyone
Home >> Fiat >> 1979 >> Strada Custom, 2D Hatchback, Automatic Trans >> Repair and Diagnosis (Single Page) >> Engine Mechanical >> Mechanical >> 128, STRADA & X1/9 4-Cylinder >> Crankshaft Main & Connecting Rod Bearings >> Front & Rear Main Bearing Oil Seal Service

Front & Rear Main Bearing Oil Seal Service

  1. Front and rear main bearing oil seals are secured in end plates mounted to both ends of crankcase. Both seals should be replaced when crankshaft has been removed.
  2. Drive seals from end plates and install new ones. Lubricate sealing lip of seal and use new gaskets when installing end plates.
scientia non olet · About LEMON Manuals