LEMON Manuals: Even more car manuals for everyone
Home >> Fiat >> 1978 >> 128 Base, 2D Sedan >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 128 & X1/9 4 Cylinder >> Engine Cooling >> Water Pump

Water Pump

  1. Remove protective panels from bottom of engine and drain cooling system. Remove alternator and drive belt. Disconnect hoses from water pump, then remove nuts attaching water pipe to pump and disconnect pipe. Remove bolts holding water pump to engine and remove pump.
  2. Clean all gasket surfaces and install new gasket. To install, reverse removal procedure and refill cooling system. Run engine and check for leaks.