LEMON Manuals: Even more car manuals for everyone
Home >> Fiat >> 1978 >> 128 Base, 2D Sedan >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 128 & X1/9 4 Cylinder >> Camshaft >> Timing Belt Replacement >> Removal 128

Removal 128

  1. Remove right guard and loosen timing chain cover retaining screws, from under vehicle. Remove timing chain cover. Check timing by aligning index marks on top and bottom of camshaft sprocket with index marks on engine mounting and upper case. Index on crankshaft sprocket should be in alignment with index on crankshaft seal case.
  2. Put vehicle in low gear and apply hand brake to prevent crankshaft from turning. Remove fan belt, loosen tensioner pulley retaining nut and relieve tension. Remove timing belt.
scientia non olet · About LEMON Manuals