Resistance Test
Using ohmmeter, measure resistance between fuel gauge terminal and ground terminal with float at points "F" and "E". See Fig 2 . See FUEL SENDING UNIT RESISTANCE . Ensure resistance changes smoothly when float arm is moved slowly between points "F" and "E". Replace sending unit if readings are not as specified.
FUEL SENDING UNIT RESISTANCE
| Measure Point | Ohms | |
|---|---|---|
| AWD | ||
| Main Gauge - "F" | 1-3 | |
| Main Gauge -"E" | 55.9-57.9 | |
| Sub Gauge - "F" | 1-3 | |
| Sub Gauge "E" | 49.1-51.1 | |
| FWD | ||
| "F" | 2-6 | |
| "E" | 105-119 | |