Dynamic Damper
Dynamic damper must be properly positioned on axle shaft. Position damper so proper distance exists between damper and end of boot with axle shaft in a straight position. See Fig 1. Distance must be within specification. See DYNAMIC DAMPER INSTALLATION SPECIFICATIONS .
DYNAMIC DAMPER INSTALLATION SPECIFICATIONS
| Application | (1) Damper-To-Boot End Distance In. (mm) | |||
|---|---|---|---|---|
| 1.5L | ||||
| A/T | 13.70-13.94 (348-354) | |||
| M/T | 18.82-19.06 (434-439) | |||
| 1.8L | ||||
| Left (M/T) | 14.25-14.49 (362-368) | |||
| Right (A/T) | 7.77-8.01 (197-203) | |||
|
||||