LEMON Manuals: Even more car manuals for everyone
Home >> Eagle >> 1996 >> Summit ES, 1.8 C >> Repair and Diagnosis (Single Page) >> Engine Mechanical >> Mechanical >> 1.8L 4-CYL. Engine - VIN [C] >> Removal & Installation >> Rear Crankshaft Oil Seal >> Installation

Rear Crankshaft Oil Seal: Installation

  1. Coat seal lip with oil. Using Seal Installer MD998776-A or MD998376-01, install seal in seal case until it bottoms.
  2. Install oil separator in seal case with hole of separator at bottom of seal case (toward oil pan). Install seal case and gasket. Install flywheel or drive plate. To complete installation, reverse removal procedure.
scientia non olet · About LEMON Manuals