BIRFIELD Joint (BJ) & RZEPPA Joint (RJ) Assembly: Reassembly

Ensure proper boot is installed. See BAND & BOOT APPLICATION . Apply proper amount of grease to joint and inside of boot. See AXLE SHAFT LUBRICATION SPECIFICATIONS . Tighten bands on boots with axle shaft in straight position.

AXLE SHAFT LUBRICATION SPECIFICATIONS

Application

Ozs. (g)

Outer Boot

⁽¹⁾

TJ Boot

Inner-RJ Type Axle

4.4 (125)

Inner-BJ Type Axle

3.4 (95)

⁽¹⁾	Apply same amount of grease as removed. No specification available from manufacturer.