LEMON Manuals: Even more car manuals for everyone
Home >> Eagle >> 1996 >> Summit Base >> Repair and Diagnosis (Single Page) >> Suspension >> Rear Suspension >> Removal & Installation >> Wheel Bearing >> Removal (Disc Brakes)

Removal (Disc Brakes)

  1. Raise and support vehicle. Remove wheel assembly. Remove speed sensor (if equipped). Disconnect parking brake cable and brake hose. Remove tube bracket. Remove brake disc and caliper assembly.
  2. Support caliper aside. Remove hub cap, wheel bearing nut and washer (if equipped). Remove rear hub assembly. Replace rear hub assembly as unit. Separate speed sensor rotor (if equipped).
scientia non olet · About LEMON Manuals