LEMON Manuals: Even more car manuals for everyone
Home >> Eagle >> 1996 >> Summit Base >> Repair and Diagnosis (Single Page) >> Brakes >> Parking Brake System >> Disc Brakes & Drum Brakes >> Removal & Installation >> Parking Brake Shoes >> Installation

Parking Brake Shoes: Installation

  1. To install, reverse removal procedure. When installing shoe-to-anchor spring, ensure spring is installed correctly. When installing adjuster, install left adjuster with adjusting bolt facing vehicle front and right adjuster with adjusting bolt facing vehicle rear.
  2. After tightening flange nut, align spindle indentation and crimp nut. After installing speed sensor, ensure gap between rotor teeth and sensor pole piece is 0.008-0.028" (0.20-0.71 mm).
scientia non olet · About LEMON Manuals