Rear Suspension Assembly: Removal
- From inside trunk, use Ornament Remover (MB990784 ) to remove rear shelf and rear end trims. Remove luggage compartment floor box. Remove lid to shock absorber.
- Remove rear crossmember undercover panel. With manual transmission, remove heated oxygen sensor bolt. On all models, remove center exhaust pipe.
- Remove caliper and brake disc. See Figure. Remove parking brake cable end. Remove upper arm bracket mounting bolts. Remove cap and shock absorber mounting nuts. On models with ABS, remove rear wheel speed sensor. Remove grommet.
- On all models, remove trailing arm bolt. Use a jack to support crossmember. Remove crossmember self-locking nuts. Remove rear suspension assembly.