Removal & Installation: Thermostat: Installation
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 1997 Dodge Avenger, 1997 Chrysler Sebring, 1996 Dodge Avenger, 1996 Chrysler Sebring, and 1995 Dodge Avenger. However, it is still accessible from the selected car via links, so may be relevant.
Install thermostat so that bleed valve is pointing up. See Fig 2. Ensure not to damage "O" ring when installing thermostat. Ensure "O" ring does not come in contact with oil. To complete installation, reverse removal procedure. Tighten all fasteners to specification. See TORQUE SPECIFICATIONS .