Rocker Arm & Valve Lash Adjuster: Removal
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 1997 Dodge Avenger, 1997 Chrysler Sebring, 1996 Dodge Avenger, 1996 Chrysler Sebring, and 1995 Dodge Avenger. However, it is still accessible from the selected car via links, so may be relevant.
Remove cylinder head cover. Remove spark plug tube oil seal. Remove camshaft oil seal. Install Auto Lash Adjuster Retainers (MD998443) to hold valve lash adjusters in position when rocker arms are removed. See Figure. Remove rocker shaft spring. Record position of flat side of rocker arms in order to realign rocker arm oil passages during installation. Remove rocker arms "A" and "B". See Figure. Remove rocker arm shaft. Remove valve lash adjuster. Remove rocker arm "C". Remove rocker arm shaft. Remove valve lash adjuster.