LEMON Manuals: Even more car manuals for everyone
Home >> Eagle >> 1995 >> Talon ESi, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 62 (2.5L V6 Engine - VIN [N] - Avenger & SEBRING Coupe) >> Removal & Installation >> Fuel Pressure Release

Fuel Pressure Release

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 1997 Dodge Avenger, 1997 Chrysler Sebring, 1996 Dodge Avenger, 1996 Chrysler Sebring, and 1995 Dodge Avenger. However, it is still accessible from the selected car via links, so may be relevant.
WARNING: Fuel system is under pressure. Pressure must be released before servicing fuel system components.

Pull rear seat stoppers and remove rear seat cushion. See Fig 1. Remove fuel pump cover and disconnect fuel pump connector. Start engine and allow it to run until it stalls. Turn ignition off.

Fig 1: Removing Rear Seat Cushion
G00078723Courtesy of CHRYSLER CORP.